Avigilon™ Control Center 5.6 Release Notes

---

Avigilon™ Control Center 5.6 Release Notes Version 5.6.2.26 --- Released Monday January 11th, 2016 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users of e-mail notifications, POS transaction sources, or event search will benefit by upgrading. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • •

Fixed an issue that prevented ports other than 465 from being used for the configured e-mail server port if TLS/SSL was enabled. Ensured that the motion overlay was shown when viewing motion event search results. Corrected an issue that prevented an additional POS transaction source from being added to a server that has an available POS license.

Known issues in this release •

• •

It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.26 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.30 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.34 for HD Multisensor cameras V2.6.0.104 for HD Micro Dome cameras V2.6.0.104 for HD PTZ cameras V2.6.0.100 for HD Bullet cameras V2.6.0.100 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.22 --- Released Friday December 18th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users that need to connect multiple ACC Sites (of different license editions) to a single ACC Gateway and Moxa E2210 users that have rules with conditional execution based on the state of the Moxa’s digital inputs will benefit by upgrading. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed •

• • • • •

Corrected an issue preventing the ACC Gateway from connecting to two different Sites that have different license editions (such as Enterprise and Standard, or Enterprise and the ACC ES HD 4-port recorder). Corrected the rule triggering behaviour for rules created with conditions that include multiple digital inputs from the same device (e.g. a Moxa E2210) Ensured that an in progress video export isn't interrupted by the user being logged out due to an idle session timeout Ensured that the pre and post record time settings for motion detection are retained after a restart of ACC Server Fixed an issue where the "Send Test Email" button in the email notifications setup was missing when running ACC with non-English language settings Fixed an issue where the analog video output for 2.0MP-HD-H264-B2 cameras would become disabled after the ACC Server restarts

Known issues in this release •

• •

It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.22 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.30 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.34 for HD Multisensor cameras V2.6.0.104 for HD Micro Dome cameras V2.6.0.104 for HD PTZ cameras V2.6.0.100 for HD Bullet cameras V2.6.0.100 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.18 --- Released Tuesday November 24th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users of the HTML5 Web Client or ActiveX Client should consider upgrading to this release to resolve the issues noted below. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • •

Fixed an issue where the ActiveX Client would crash when attempting to move a PTZ camera Corrected an issue where zooming did not always work correctly when using the HTML5 Web Client with Chrome

Known issues in this release •

• •

It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.24 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.34 for HD Multisensor cameras V2.6.0.104 for HD Micro Dome cameras V2.6.0.104 for HD PTZ cameras V2.6.0.100 for HD Bullet cameras V2.6.0.100 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.16 --- Released Tuesday November 10th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users of the ACC Gateway’s HTML5 Web Client will benefit by upgrading, due to the resolved login issue listed below. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • •

Fixed an issue where it was not possible to log into a site using the ACC Gateway's HTML5 Web Client after an unsuccessful login attempt. Corrected an issue where a bookmark's title and description could appear to be cut-off if the text was too long. Ensured that the text in the ACC Client's help documentation’s menu is visible when the mouse hovers over one of the entries and when a particular entry is selected.

Known issues in this release •

• •

It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.16 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.24 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.34 for HD Multisensor cameras V2.6.0.104 for HD Micro Dome cameras V2.6.0.104 for HD PTZ cameras V2.6.0.100 for HD Bullet cameras V2.6.0.100 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.14 --- Released Wednesday October 21th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users of the ACC client or having Arecont cameras deployed will benefit by upgrading due to the fixes noted below. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • • • • • • • • • • • •

Resolved an issue when upgrading from 5.4.2 that POS data would be lost Fixed several issues where ACC Client has been observed to crash. Corrected an issue where ACC Client became unresponsive and / or took a long time to close when exited. Resolved an issue where the logical ID of a disconnected analog camera cannot be reused for another channel/device Corrected an issue where ACC export image resolution results in distorted playback Fixed an issue where the ACC client freezes when double clicking with the ‘‘hand tool’’ selected Corrected an issue where pixel motion search did not work with Arecont cameras Fixed an issue where ACC Client crashes when disconnected from the server. Corrected an issue where PTZ did not work if the PTZ control was selected before adding a PTZ camera to a view Fixed an issue where it takes a long time for the ACC site list to populate on web client login Corrected an issue where restoring site setting does not restore POS items for email notification use Resolved an issue where the server list scroll bar is disabled on the ACC site upgrade screen Fixed an issue where intermittently the web client is not able to login to ACC

Known issues in this release •

• •

It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.14 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.24 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.34 for HD Multisensor cameras V2.6.0.102 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.100 for HD Bullet cameras V2.6.0.100 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.10 --- Released Tuesday October 6th, 2015 Release Summary This release of Avigilon™ Control Center introduces several new features, most notably the ability to configure rules to conditionally trigger based on the state of a digital input. Users that are interested in this or the other new features highlighted below should adopt this release. This release is also a service release for ACC 5.6, and users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading as well. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

New Features • •

•

• •

Rules can now be configured to conditionally trigger based on the state from a digital input. Selecting a digital input as a condition is optional when configuring the rule. It is now possible to add teach markers for use with Teach By Example for a device with selflearning analytics in the event, alarm, and motion search screens. A new group privilege has been added to grant users the ability to add teach markers from these screens. After manually finding a site and logging in, the ACC Client now automatically discovers all of the other server endpoints for a multi-server site. This ensures that video is streamed directly from the individual servers to the client, rather than being routed through a single server, which can impact performance. Kerberos authentication is now supported when Windows Active Directory synchronization is enabled in ACC. Web Pages in ACC now support the same web technologies (e.g. HTML5) as the version of Internet Explorer installed on the system running the ACC Client.

Issues Fixed •

• •

• •

Changed the behavior for email notifications and rules that send an email as an action, such that the first event is always sent out immediately when the notification or rule is configured to send ‘at most’ every few minutes. Fixed an issue preventing configuring changes to image and compression settings for Sony SNC-HM662 cameras. Correct an issue that caused the ‘‘Add’’, ‘‘Edit’’ and ‘‘Delete’’ buttons in the Video Analytics Configuration to not be visible when running the Client on a computer with a low screen resolution setting. Enabled digital PTZ functionality on Axis 212 cameras. Fixed a bug that could cause the ACC Gateway to become non-responsive under some conditions.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.10 (continued) Issues Fixed (continued) •

•

• • • • • • • • • • • • •

• •

Corrected an issue that could cause the search results for classified objects in Motion Search to return incomplete and inconsistent results when the client was connected to the server over a remote connection. Fixed an issue that could allow a user without the ‘‘View Recorded Images’’ privilege to access POS search results on one site if also logged into another site where the user has that privilege. Ensured that the ‘‘Apply’’ button text isn’t truncated when viewing the Recording and Bandwidth dialog with Russian language settings. Fixed an issue that could cause a long device name to be difficult to read when included in a saved snapshot in PDF format Corrected an issue that prevented users that had the ‘‘Setup Email’’ privilege from setting up external notifications if they didn’t also have the ‘‘Setup Rules’’ privilege Fixed an issue that caused motion events associated with a protected bookmark to be deleted when the video would have otherwise have aged out (if unprotected) Ensured that the correct device is selected when performing a motion search from a specific result from a previously run event search Ensured that classified object events are removed after the associated video is aged. Corrected an issue that caused the ‘‘Active Directory authorization failed’’ dialog to be displayed three times when incorrect AD credentials were provided. Added a close icon (X) to the Site Upgrade dialog window Fixed an issue that could cause the ACC Client to crash when a Web Page was configured to open an invalid URL Fixed an issue that prevented a user from changing the region of interest (ROI) when searching for classified objects in Motion Search if the cursor tool wasn't already selected Ensured that the .msi installers can install on Windows Vista and Windows Server 2008. Corrected an issue that prevented a rank name from being changed if it was blank. Fixed an issue that could allow a user without the ‘‘Export images’’ privilege to export video from devices connected to one site if also logged into another site where the user has that privilege. Prevented the ACC Client from crashing when a multi-clip .AVE export was created where multiple clips had the same start and end times. Fixed an issue that could prevent a user from selecting a remaining clip when exporting multiple clips, after one of the clips was deleted

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.2.10 (continued) Issues Fixed (continued) • • •

Corrected several places in the HTML5 Web Client where English text was shown when Traditional Chinese language settings were used. Ensured that a Saved View opens in a new tab, rather than replacing the previous tab, in the HTML5 Web Client Fixed an issue that prevented the minimized system tree from expanding when clicked in the HTML5 Web Client

Known issues in this release • •

• •

The ACC Client has been observed to crash in some rare cases where it is being heavily used for video playback and new windows are being opened and closed at the time. It is not possible to use the "Find Site" option in the ACC Gateway's web configuration interface to manually add another server in the same ACC site. The web configuration page will hang and the server will fail to be added. Using scrolling to digitally zoom in or out on image panels or to change the zoom level on the timeline doesn't work correctly on some versions of the Safari browser. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client.

Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.18 for HD H.264 H3 cameras with self-learning analytics V3.8.0.8 for HD Pro H.264 cameras V 3.2.0.32 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.94 for HD Bullet cameras V2.6.0.94 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.28 --- Released Monday August 31st, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users of the ACC Gateway or Axis 211 and 212 cameras will benefit by upgrading due to the fixes noted below. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • • • • • •

Fixed an issue that could cause the ACC Gateway to become unresponsive in some cases. Corrected an issue that could cause ACC Server to crash in some cases when Axis 211 and Axis 212 cameras were connected. Decreased the time it takes for a user login to complete, resulting in a noticeably improved login time for larger sites. Ensured that the installer successfully installs ACC on Windows Server 2008 SP2. Ensured that, after renaming it, the new name for a Rialto digital output is correctly updated in ACC. Corrected an issue that caused the Rank 'edit' button to be hidden in the edit screen for the Corporate Hierarchy when German or Dutch language settings were used. Ensured that when the ACC Client is opened and the ‘Save/restore window layout’ setting is enabled, that the PTZ controls are available for a PTZ camera included in a restored view.

Known issues in this release • • •

It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client. This has been an issue since ACC 5.4.2 Zooming in or out on an ACTi PTZ can cause the camera to pan up. This has been an issue since ACC 5.2.2. The ACC Client and Server .msi installers cannot install on Windows Vista or Windows Server 2008. This has been an issue since these installers were introduced.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.28 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.18 for HD H.264 H3 cameras with self-learning analytics V3.4.2.6 for HD Pro H.264 cameras V 3.2.0.30 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.94 for HD Bullet cameras V2.6.0.94 for HD H.264 H3 cameras V2.2.0.42 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.24 --- Released Wednesday August 12th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users of PTZ cameras will benefit by upgrading due to the fix for PTZ tours, noted below as the first fixed issue. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • • • • •

Corrected an issue that prevented users that are not part of the default administrator group from being able to stop or restart PTZ tours Ensured that it is possible to trigger a digital output from a panel in the alarms screen Fixed an issue where the microphone connection would be lost for some Hikvision cameras after restarting ACC Server Corrected an issue where ACC could incorrectly report that Avigilon™ HD Micro Dome cameras were still upgrading after the camera had finished its firmware upgrade Fixed an issue that could cause the ACC Player and Client to crash when opening the Export screen on a computer that does not have any printers installed Corrected an issue in the HTML5 Web Client that could cause the image panels to overlap when some layouts were configured

Known issues in this release •

• • • •

Connecting Axis 211 and Axis 212 cameras or upgrading to ACC 5.6 when these cameras are used can cause ACC Server to crash in some cases. Disabling motion detection on the camera seems to be a workaround. This has been an issue since ACC 5.6. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client. This has been an issue since ACC 5.4.2 Zooming in or out on an ACTi PTZ can cause the camera to pan up. This has been an issue since ACC 5.2.2. The ACC Client and Server .msi installers cannot install on Windows Vista or Windows Server 2008. This has been an issue since these installers were introduced. The installer does not successfully install ACC on Windows Server 2008 SP2. This has been an issue since ACC 5.6.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.24 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.16 for HD H.264 H3 cameras with self-learning analytics V3.8.0.4 for HD Pro H.264 cameras V 3.2.0.28 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.94 for HD Bullet cameras V2.6.0.94 for HD H.264 H3 cameras V2.2.0.40 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.22 --- Released Thursday July 30th, 2015 Release Summary This is a service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release, unless they use PTZ cameras or certain Axis cameras, due to the first two existing known issues noted below. Users of previous versions of ACC 5 can refer to the earlier release notes that follow for further information on new features and issues resolved.

Issues Fixed • • • •

• •

Fixed an issue where the ACC Player could close unexpectedly immediately after opening an .AVE export in some cases. Corrected an issue where the pixel search results from Avigilon™ JPEG2000 cameras were inaccurate for the selected area in a scene. Corrected an issue where it was not possible to save the External Notifications settings, such as the email server, when using an ACC 5.6 Client with an older ACC 5.4 Server. Fixed an issue where the Motion Detection sensitivity and threshold slider values were always set to the highest setting in the ACC Client when connected over a remote connection to the server. Ensured that the ACC Admin Tool only accepts a valid base port number in the network settings Ensured the ACC correctly prompts for the Rialto to be rebooted after changing a connected camera.

Known issues in this release • •

• • • •

Users that are not part of the default administrator group are sometimes not able to stop or restart PTZ tours. This has been an issue since ACC 5.6. Connecting Axis 211 and Axis 212 cameras or upgrading to ACC 5.6 when these cameras are used can cause ACC Server to crash in some cases. Disabling motion detection on the camera seems to be a workaround. This has been an issue since ACC 5.6. The ACC Player and Client can crash when opening the Export screen on a computer that doesn't have any printers installed. This has been an issue since ACC 5.6. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client. This has been an issue since ACC 5.4.2 Zooming in or out on an ACTi PTZ can cause the camera to pan up. This has been an issue since ACC 5.2.2. The ACC Client and Server .msi installers cannot install on Windows Vista or Windows Server 2008. This has been an issue since these installers were introduced.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.22 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.16 for HD H.264 H3 cameras with self-learning analytics V3.8.0.4 for HD Pro H.264 cameras V 3.2.0.28 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.94 for HD Bullet cameras V2.6.0.94 for HD H.264 H3 cameras V2.2.0.40 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.18 --- Released Tuesday July 7th, 2015 Release Summary This is the first scheduled service release for Avigilon™ Control Center 5.6. Users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release. In particular, users with large sites will benefit by upgrading to this release due to several fixes and stability improvements. Users of previous versions of ACC 5 can refer to the earlier release notes, below, for further information on new features and issues resolved.

Issues Fixed • • • • • • • • • •

Fixed an issue that could prevent a site from successfully joining a parent site as a child site, in some cases. Ensured that the ACC Client doesn't crash when large numbers of maps are used. Corrected an issue that could cause the ACC Client to become unresponsive when logged in to a large site and viewing the Server Status page Fixed an issue that could cause the ACC Client to take a very long time to successfully login under some conditions. Corrected an issue with the recognition of some letters on Illinois license plates when using LPR. Fixed an issue that could cause the client to crash when clicking on the manual recording button in a saved view that includes cameras from multiple ACC sites. Ensured that the included Italian help files are correct for the current version of the software. Fixed an issue that could cause an older version of the help files to be displayed in the ACC Player. Ensured that the resolution of the video stream for Sony HM662 cameras shown in the export screen is correct when the lens type is set to panomorph. Corrected an issue in the ACC Gateway that could cause the audio talk-down feature to stop working for ACC Mobile 2.2 users if the gateway is manually removed and re-added in the app’s settings screen.

Known issues in this release • • • •

The streams received on ACC Mobile from the gateway can appear to be incorrectly sized for some third party cameras. This has been an issue since at least ACC 5.4.2. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client. This has been an issue since ACC 5.4.2 Zooming in or out on an ACTi PTZ can cause the camera to pan up. This has been an issue since ACC 5.2.2. The ACC Client and Server .msi installers cannot install on Windows Vista or Windows Server 2008. This has been an issue since these installers were introduced.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.18 (continued) Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.16 for HD H.264 H3 cameras with self-learning analytics V3.4.2.6 for HD Pro H.264 cameras V 3.2.0.28 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.94 for HD Bullet cameras V2.6.0.94 for HD H.264 H3 cameras V2.2.0.40 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.12 --- Released Thursday June 18th, 2015 Release Summary This is the initial release of Avigilon™ Control Center 5.6 and introduces many new features, listed below. These features include new search capabilities for Avigilon™ self-learning analytics devices, the ability to remotely upgrade a site, and the ability to create a backup of a server’s configuration settings making it easier to quickly deploy a replacement server. This release is also a service release for ACC 5 and users experiencing issues listed in the ‘‘Issues Fixed’’ list should consider upgrading to this release.

New Features •

• • • • • • •

•

•

• • •

Pixel search has been renamed as intelligent motion search, and now includes the ability to search for people and vehicles in recorded footage from Avigilon™ self-learning analytics devices. In addition, event search now supports searching for analytics events. Ability to upgrade all the servers in a site from any client logged-in to that site, as long as the user has adequate permissions. Settings Export and Import now includes all server settings, and has been renamed as ‘‘Backup’’ and ‘‘Restore’’ functions. Video backup has been renamed ‘‘video archive’’. Export functionality has a redesigned interface and can now be used to export several different time periods from different cameras and groups of cameras. A new rule action and associated configuration to ‘‘notify central station’’ has been added to the rule engine. Display and network settings can now be changed for the Virtual Matrix Monitor application When adding the Axis M3007 or M3027 camera (with the native driver), ACC now subscribes to the overview stream and the 4 quarter streams. For Rialto devices, the software now requires a reboot (instead of merely recommending one) when changes require it. This release also adds support for linking devices connected using the native Axis and Samsung drivers. For all Avigilon™ devices with self-learning analytics, the range of available sensitivities in the classified object motion detection dialog has been increased. In particular, the ‘‘high’’ range is now the highest sensitivity available on the device. For Avigilon™ cameras with self-learning analytics, the sensitivity of the tampering event can now be set. In addition, the regular ‘‘pixel change’’ motion detection configuration dialog and the classified object motion detection dialog have been combined. Added the ability to manually set the networking mode (WAN or LAN) on the gateway for each connected site. Added the ability to create, edit and remove bookmarks from the HTML5 web client. Official support for Windows Server 2012 R2.

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.12 (continued) Issues Fixed •

• •

• • • • • • • • • • •

• • •

The ACC Server can no longer be installed when the Camera Installation Tool is installed on the same machine. Having both installed on the same machine is not intended and can cause problems. Users with the CIT installed, will have to first uninstall the CIT from the machine where they want to install or upgrade ACC 5 Server Fixed an issue where the button to edit a POS transaction source was missing in some cases Corrected an issue with PTZ cameras where "Tour name too long" and "Device failed to set preset name" error messages were displayed and did not accurately reflect the response from the device Ensured that the view is restored upon a re-connection with the server when auto-login is enabled Added the encoder channel number to the camera name for Avigilon™ H.264 4-port encoders Ensured that it is possible modify a camera's field of view in a map when the camera is rotated downwards Fixed an issue where the PTZ tour was not available for Sony SNC-RZ25N cameras Fixed an issue with the formatting for POS transactions that could occur when the transactions are short in duration and small in content Ensured that exporting the site report works correctly when Hebrew language settings are used Corrected an issue where the video analytic configuration screen video preview would appear to be blank when high DPI settings were used When printing an image, ensured that the font size for the associated text adjusts appropriately when different sizes of paper are used In the analytic event configuration, fixed an issue where hiding the advanced options and then showing them again would result in a different analytic activity being selected. Corrected an inconsistency in the icons used for ENC-4PORT and ENC-4PORT-2AI encoders in the HTML5 Web Client Changed the behavior when creating a video archive (backup) for a time range that already exists in another backup. The creation of the second video archive will no longer overwrite an existing archive with that includes the same time range, and will instead create a second separate archive Ensured that the ACC Client fills the entire window (including the Windows task bar) when in full-screen mode Corrected an issue where exporting an image would result in a plain black image if the display adjustments had a black level set higher than the white level Corrected an issue that prevented the ACC Gateway from using HTTPS over port 80

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.12 (continued) Issues Fixed (continued) • • • • •

• • •

•

• • •

• • • • • •

Ensured that a camera with an associated alarm stops flashing on a map when the alarm is assigned to another user Fixed an issue where switching to recorded mode while viewing a POS source did not show the timeline for associated cameras Prevented an alarm from being created with an empty name, which could cause other problems including when trying to edit the alarm in the future Ensured that when zooming in for a camera with an Immervision lens, that the view would zoom to the correct location Corrected an issue where changing the aspect ratio (e.g. from 4:3 to 16:9) for a camera could prevent being able to modify an existing privacy zone and could result in a new privacy zone being placed in a location offset from when the user selected Ensured that the snapshot button is available for a disconnected camera whether the client is in live or recorded mode Fixed an issue where merging two ACC servers failed if they were installed on machines that each use different Windows language settings Corrected an issue where the ACC installers would reset the ACC rules in the Windows firewall back to default. With the fix, if the user modifies the firewall rules, running the installer won't overwrite the changes Corrected the timeline behavior when clicking on an alarm search result. Clicking on an alarm search result will now pan and zoom on the timeline so that the selected event is visible Fixed a case where the server could restart when it runs out of disk space while performing an archive (backup) of video Fixed an issue that prevented a user from selecting an area to search in pixel search (now intelligent motion search) if they had previously selected the pan tool in another view Fixed an issue where a connected camera could disappear from the system explorer in cases where all of its recorded data had been overwritten (due to data aging and storage limits) Corrected an issue preventing a LPR from being modified after upgrading from ACC 4.12 to ACC 5 Fixed an issue preventing the changes for "Show field of view" and "Show name" from being saved when editing a map Corrected an issue preventing restricted and standard users from assigning alarms Ensured that LPR watch list matches do not pop-up on the virtual matrix application Fixed an issue where push-to-talk audio wasn't always correctly recorded with the associated video by ACC Addressed a problem where the PTZ camera couldn't be locked after editing the PTZ tour settings

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.12 (continued) Issues Fixed (continued) • • • • • • • • • •

• • • • • • • • • •

Ensured that the ACC Gateway correctly reflects the camera rotation for a stream When viewing the results of a POS search, ensured that a selected event is automatically highlighted on the timeline Prevented a crash of the client that could occur when dragging a newly saved view into another view Fixed an issue where the recorded playback could have some frames appear to be corrupted when paused Made several fixes and enhancements to the ACC Client to better support high DPI settings Fixed an issue where the preview window has the incorrect time when creating an export from a pixel search result Ensured that push notifications from the ACC Gateway will make sounds when received on iOS devices Corrected problems with merging active directory users when a new server joins a site Fixed an issue where manual recording would stop when changing the WDR setting for a camera When performing an export of images (e.g. JPEG), specifying 0 as the value for "Images to Export" will change the text to "Unlimited" and export an unlimited number of images. The default value for number of images to export is also now 1. Fixed an issue where the entry for ACC Client wasn't properly cleaned up in the list of Windows installed programs when uninstalled. Ensured that the inclusion and exclusion areas for classified object motion detection are correctly shown when the client is connected over a WAN connection Changed the ACC behavior when restoring defaults for Avigilon™ cameras with selflearning analytics to set an empty pixel motion mask, consistent with the latest firmware Ensured that the mouse cursor is hidden when the user interface is inactive on the virtual matrix application Fixed an issue where the ACC Player wouldn't always correctly adjust the layout to accommodate all of the cameras included in the export Corrected an issue where the system tree wasn't displayed after collapsing it and later expanding it Ensured that the help button in the standalone ACC Player correctly loads the help files Fixed an issue where the older version entry for ACC Server wasn't properly cleaned up in the list of Windows installed programs when upgraded using the .msi installer Fixed an issue where the help files were installed incorrectly when the ACC Server .msi installer was used Corrected an issue in the HTML5 Web Client where double clicking a bookmark would sometimes load the wrong one

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.

Avigilon™ Control Center 5.6 Release Version 5.6.0.12 (continued) Known issues in this release •

• • • • • • •

The Italian version of the help files are not the latest version for ACC 5.6. As a workaround, the Italian ACC user guide is available from the support and downloads section of the Avigilon™ website The resolution of the preview window shown in the export screen continuously changes for Sony HM662 cameras when the lens type is set to panomorph. The ACC Client .msi installer cannot install on Windows Vista or Windows Server 2008. This is also an existing issue with the ACC Server .msi installer. The streams received on ACC Mobile from the gateway can appear to be incorrectly sized for some third party cameras. The ACC Client can crash in some cases when large numbers of maps are used. This is an existing issue that can occur in ACC 5.4.2 and possibly earlier Zooming in or out on an ACTi PTZ can cause the camera to pan up. This has been an issue since ACC 5.2.2. It is not possible to save a snapshot of a disconnected camera in the HTML5 Web Client. This has been an issue since ACC 5.4.2 The ACC Client can crash when clicking on the manual recording button in a saved view that includes cameras from multiple ACC sites, if the user isn’t logged into some of those sites. This is an existing issue in ACC 5.4.2

Avigilon™ Camera FW Included • • • • • • • • • • •

V3.6.0.14 for HD H.264 H3 cameras with self-learning analytics V3.4.2.6 for HD Pro H.264 cameras V 3.2.0.26 for HD Multisensor cameras V2.6.0.92 for HD Micro Dome cameras V2.6.0.92 for HD PTZ cameras V2.6.0.90 for HD Bullet cameras V2.6.0.90 for HD H.264 H3 cameras V2.2.0.40 for H.264 encoders V.2.2.0.34 for HD H.264 cameras V4.4.0.2 for JPEG2000 Panoramic cameras V4.6.0.14 for JPEG2000 HD Pro cameras

© 2016 Avigilon Corporation. All rights reserved. No license is granted with respect to any copyright, trademark, patent or other intellectual property rights of Avigilon Corporation or its affiliates.