127 W. Fairbanks Ave. Suite 438 Winter Park, FL 32789 407.644.6957 PH 407.644.2366 FX
[email protected]
BUILDING DROPS A Perfect Solution in Every Drop Certificate of Authorization: 29578
Product Evaluation Report of
Ply Gem Windows Builder Series 4712 / 4812 Single Hung Window
for Florida Product Approval
FL# Report No. 1869 Florida Building Code 2007 & 2010 Per Rule 9N-3 Method: 1 – D (Engineering Evaluation) Category: Windows Sub – Category: Single Hung Product: Material: Product Dimensions:
Builder Series 4712 / 4812 Single Hung Window Aluminum 6063-T5 53” x 72” 48” x 84”
Prepared For: Ply Gem Windows 433 N. Main St. P.O. Box 559 Rocky Mount, VA 24151 Prepared by: Hermes F. Norero, P.E. Florida Professional Engineer # 73778 Date: 02/24/12 Contents: Evaluation Report Pages 1 – 4 Installation Details Page 5
Digitally signed by Hermes F. Norero, P.E. Reason: I am approving this document Date: 2012.03.12 17:35:21 -04'00'
Hermes F. Norero, P.E. Florida No. 73778
BUILDING DROPS
FL#: Date: 02/24/2012 Report No: 1869
A Perfect Solution in Every Drop Certificate of Authorization: 29578
Manufacturer: Product Category: Product Sub‐Category: Compliance Method: Product Name:
Ply Gem Windows Windows Single Hung State Product Approval Rule 9N‐3.005 (1)(d) Builder Series 4712 / 4812 Single Hung Window (Impact) 53” x 72” 48” x 84”
This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL # 73778) for Ply Gem Windows based on Rule Chapter No. 9N‐3.005, Method 1d of the State of Florida Product Approval, Department of Community Affairs ‐ Florida Building Commission.
Scope:
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company manufacturing or distributing the product or in any other entity involved in the approval process of the product named herein. This product has been evaluated for use in locations adhering to the 2007 & 2010 Florida Building Code. See Installation Instructions PGW036, signed and sealed by Hermes F. Norero, P.E. (FL # 73778) for specific use parameters. Limits of Use: 1. 2. 3.
4.
5.
This product has been evaluated and is in compliance with the 2007 & 2010 Florida Building Code, excluding the “High Velocity Hurricane Zone” (HVHZ). Product anchors shall be as listed and spaced as shown on details. Anchor embedment into substrate material shall be beyond wall dressing or stucco. When used in areas requiring wind borne debris protection this product complies with Section 1609.1.2 of the 2007 & 2010 Florida Building Code and does not require an impact resistant covering. Site conditions that deviate from the details of PGW036 require further engineering analysis by a licensed engineer or registered architect. See Installation Instructions PGW036 for size and design pressure limitations.
Hermes F. Norero, P.E. Florida No. 73778 Page 2 of 5
BUILDING DROPS
FL#: Date: 02/24/2012 Report No: 1869
A Perfect Solution in Every Drop Certificate of Authorization: 29578
Quality Assurance:
The manufacturer has demonstrated compliance of window products in Accordance with the Florida Building Code and Rule 9N‐3.005 (3) for manufacturing under a quality assurance program audited by an approved quality assurance entity through National Accreditation and Management Institute (FBC Organization #: QUA1789)
Performance Standards:
The product described herein has been tested per:
Referenced Data:
1.
2.
AAMA/WDMA/CSA 101/I.S.2/A440‐05 ASTM E 1886‐02 ASTM E 1996‐02 Product Testing performed by National Certified Testing Laboratories (FBC Organization # TST4744) Report #: NCTL‐110‐13262‐2 Report Date: 08/14/10 Report #: NCTL‐110‐13259‐1 Report Date: 08/14/10 Report #: NCTL‐110‐13259‐2 Report Date: 08/14/10 Report #: NCTL‐110‐13262‐1 Report Date: 08/14/10 Report #: NCTL‐110‐13264‐1 Report Date: 08/20/10 Report #: NCTL‐110‐13420‐1 Report Date: 10/22/10 Report #: NCTL‐110‐13482‐1 Report Date: 11/18/10 Quality Assurance National Accreditation and Management Institute (FBC Organization #: QUA1789)
Hermes F. Norero, P.E. Florida No. 73778 Page 3 of 5
BUILDING DROPS
FL#: Date: 02/24/2012 Report No: 1869
A Perfect Solution in Every Drop Certificate of Authorization: 29578
Installation: 1. Approved anchor types and substrates are as follows: Flange Installation: A. For concrete or masonry substrate where one by (1X), non‐structural, wood bucking is employed, use 3/16” diameter ITW Tapcon type concrete screw anchors of sufficient length to achieve minimum embedment of 1.25” into concrete or masonry. B. For concrete or masonry substrate where wood bucking is NOT employed, use 3/16” diameter ITW Tapcon type concrete screw anchors of sufficient length to achieve minimum embedment of 1.25” into concrete or masonry. C. For steel stud substrate, use #10 self‐tapping type steel anchors of sufficient length to achieve a minimum 3 threads penetration beyond steel structure. Fin Installation: A. For steel stud substrate, use #8 self‐tapping type steel anchors of sufficient length to achieve a minimum 3 threads penetration beyond steel structure. Refer to manufacturer Installation Instructions PGW036 for anchor spacing and more details of the installation requirements. Design Pressure: PRODUCT
OVERALL SIZE WIDTH
HEIGHT
DP RATING
MISSILE IMPACT RATING LARGE AND SMALL
4712F IR
53"
72"
+ 50 /- 57 PSF
MISSILE RATED LARGE AND SMALL
4712FL IR
53"
72"
+ 50 /- 57 PSF
MISSILE RATED LARGE AND SMALL
4812F IR
53"
72"
+ 50 /- 57 PSF
MISSILE RATED LARGE AND SMALL
4712F IR
48"
84"
+ 50 /- 57 PSF
MISSILE RATED LARGE AND SMALL
4712FL IR
48"
84"
+ 50 /- 57 PSF
MISSILE RATED LARGE AND SMALL
4812F IR
48"
84"
+ 50 /- 57 PSF
MISSILE RATED
Hermes F. Norero, P.E. Florida No. 73778 Page 4 of 5
BUILDING DROPS
FL#: Date: 02/24/2012 Report No: 1869
A Perfect Solution in Every Drop Certificate of Authorization: 29578
Installation Method Ply Gem Windows Builder Series 4712 / 4812 Single Hung Window (O/X) SEE ANCHOR SCHEDULE
SEE ANCHOR SCHEDULE
SEE ANCHOR SCHEDULE
"O"
"X" SEE ANCHOR SCHEDULE
ANCHOR LAYOUT
EDGE
EMBEDMENT
JAMB O.C.
CORNER
DISTANCE
DISTANCE
(IN.)
(IN.)
(IN.)
12
9
4
20
-
18
4
20
-
18
4
HEAD
INSTALLATION
QTY PER
TYPE
LOCATION
(IN.)
(IN.)
#8 SELF-TAPPING
FIN
1
STEEL STUD
3 THREADS
N/A
12
3/16" ITW TAPCON
FLANGE
1
CONCRETE/MASONRY
1.25
2.5
#10 SELF-TAPPING
FLANGE
1
STEEL STUD
3 THREADS
N/A
ANCHOR TYPE
SUBSTRATE
DISTANCE
(IN.)
SILL
O.C. DISTANCE O.C. DISTANCE
Hermes F. Norero, P.E. Florida No. 73778 Page 5 of 5