Burner Inst Sht


[PDF]Summit Manifold/Burner Inst Sht - Rackcdn.comhttps://875726a9e7c5ae455218-c9ea439bc3c8107a715695dc84896d67.ssl.cf2.rackc...

0 downloads 118 Views 164KB Size

Summit Manifold & Burner Tube Replacement Instruction Sheet Replacing Main Burners or Manifold Assembly 1. Your Weber Gas Barbecue must be OFF and cool.

7. Disconnect white and black wire from each igniter. Figure 2.

2. Turn OFF gas at source. 3. To remove control panel refer to “Remove the control panel and the front panel” in the Step-By-Step Guide. 4. Remove cooking grates. 5. Remove Flavorizer bars.

White wire

6. Remove the manifold by unsnapping the clips at the right and left front of the cooking box. Figure 1.

Black wire

Figure 2

8. Unlatch the Spider Stopper Guards and remove. Figure 3.

Summit 4 Burner

Figure 3

Summit 6 Burner

Figure 1

98217

3/97

9. Disconnect corrugated gas line from manifold. Figure 4.

10. Pull the manifold out of the burners. Figure 5.

Manifold Corrugated Gas Line

Summit 4 Burner

Summit 4 Burner

Corrugated Gas Line

Manifold Summit 6 Burner

Summit 6 Burner

Figure 5 Figure 4

11. Slide the burner assembly from each Heat Zone. The left and right burners are connected by the Crossover tube. Figure 6 (a). Pull out of here

13. To reinstall the burners, reverse steps 3 through 12. CAUTION: The burner openings must be positioned properly over the valve orifices. Figure 8 (a). Check proper assembly before fastening manifold in place. Figure 8 (b).

(a)

(a) Valve Crossover tube

Burner Orifice

(b)

Figure 6 12. Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 7. Separate here

Crossover tube

Figure 8 14. Reinstall the Spider Stopper Guards. Slightly rotate the Spider Stopper Guards so that the seams are in line with the Venturi fins. There should be no gaps in the seams or in the fit around the burners and valves. Figure 9.

Check fit around valve

Figure 7

Venturi fin

Check fit around burner

Figure 9 15. Reinstall manifold. Reverse steps 6 through 10. 16. Reinstall corrugated gas line to manifold. 17. Leak check all connections. 18. Refer the Step-By-Step Guide to remove the control panel and front panel. Reinstall front panel and control panel. 19. Reinstall flavorizer bars and cooking grates.