county of los angeles

---

COUNTY OF LOS ANGELES SPECIFICATIONS For DEPARTMENT OF PUBLIC HEALTH Date: May 12, 2015 Solicitation #: RFB-IS-15201370

Requisition #: DRQN-PH-15003350

For: CISCO CATALYST & APC EQUIPMENT – (BRAND ONLY) BIDDER TO COMPLETE THE FOLLOWING INFORMATION

Company Name: Address: Contact Person: Tel. No.:

Fax No.:

E-mail address: Notice: Bidder shall state in the right hand column wherein your product offered differs, indicating performance, specific size, and/or make and model of all components when not exactly as specified. When bidder is bidding items exactly as described in the left hand column, please state “AS SPECIFIED” on the right hand column. Failure to return and fill in this form will be considered sufficient reason for rejection of your offer. Literature alone is not sufficient for consideration of your offer. All equipment must meet California and County of Los Angeles safety requirements. The equipment shall be the latest model and shall not have been used as a demonstrator. Bidders shall submit detailed literature on the unit they propose to furnish.

Bid #RFB-IS-15201370

Page 1 of 6

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #1 PART #: ____________________________________

Cisco Catalyst 3650 Switch Part# WS-C3650-48PS-L

MFG: _______________________________________ The Cisco switch shall have the following specifications:  Integrated wireless controller capability 

Up to 40G of wireless capacity per switch



Support for up to 25 access points and 1000 wireless clients on each switching entity



24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports



Three fixed-uplink models with 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, or 4 x 10 Gigabit Ethernet ports



Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput



Dual redundant, modular power supplies and three modular fans providing redundancy Full IEEE 802.3at (PoE+) with 30 W power on all ports in 1 rack unit (RU) form factor Software support for IPv4 and IPv6 routing, multicast routing, modular quality of service (QoS), Flexible NetFlow (FNF) Version 9, and enhanced security features

 

LINE #2 PART #: ____________________________________

Cisco License – Access Point Part# LIC-CTIOS-1A 

MFG: _______________________________________

A paper license is required

LINE #3 PART #: ____________________________________

Cisco Aironet 3702i Wireless Access Point Part# AIR-CAP3702I-A-K9

MFG: _______________________________________

The following Cisco access point shall have the following specifications: 

Integrated 802.11ac Wave 1 radio to support a 4x4 MIMO (multiple-input and multiple-output) with three spatial streams

Bid #RFB-IS-15201370

Page 2 of 6

(Rev. 03/08)

REQUIREMENTS

    

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

Cisco CleanAir Technology with enhanced 80 MHz channel support Updated Cisco ClientLink 3.0 to boost performance for all clients, including 802.11ac Dual Band 2.4/5 GHz integrated radios to address the growing needs of BYOD and bandwidth demands Optimized AP Roaming ensures clients will associate with the best AP offering the best data rate available Modular designed Access Point supports other modules such as Wireless, Security, Cisco 3G Small Cell or future technology such as 802.11ac Wave 2 Module

LINE #4 PART #: ____________________________________

Cisco Low Profle Mounting Bracket Part# AIR-AP-BRACKET-1 =

MFG: _______________________________________

This low profile mounting bracket shall meet the following specifications:  

This bracket minimizes the gap between the AP and the ceiling. Dimensions: 7 x 6 x 1 inches ; 6.4 ounces

LINE #5 PART #: ____________________________________

Cisco Network Device Mounting Bracket Part# AIR-AP-BRACKET-2=

MFG: _______________________________________

This mounting bracket shall meet the following specifications: 



This bracket is versatile (works with electrical boxes, wall mounting, and adapts to ceiling installations) but leaves a larger gap between the ceiling and the AP than the low-profile bracket. It works in all environments. Dimensions: 7.5 x 5.5 x 1 inches ; 6.7 ounces

LINE #6 Cisco Ceiling Grid Clip Part# AIR-AP-T-RAIL-R=  If the ceiling tiles hang below the ceiling grid, this clip provides the best fit between the AP and the ceiling.

Bid #RFB-IS-15201370

PART #: ____________________________________ MFG: _______________________________________

Page 3 of 6

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #7 PART #: ____________________________________

Cisco Mounting Clip for Wirless AP Part# AIR-AP-T-RAIL-F=

MFG: _______________________________________ The mounting clip shall meet the following specifications: 

If the ceiling tiles are flush with the ceiling grid, this clip provides a snug fit between the AP and the ceiling.

LINE #8 PART #: ____________________________________

Cisco T-Rail Channel Adapter Part# AIR-CHNL-ADAPTER=

MFG: _______________________________________ LINE #9 PART #: ____________________________________

APC Smart-UPS X SMX3000RMLV2UNC Part# SMX3000RMLV2UNC

MFG: _______________________________________ The UPS shall have the following specifications:                

120 V Output Power Capacity 2700 Watts / 3000 VA Max Configurable Power 2700 Watts / 3000 VA Nominal Output Voltage 230V Output Voltage Distortion Less than 5% Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Other Output Voltages 208, 220, 240 Crest Factor 3 : 1 Topology Line Interactive Waveform Type Sine wave Nominal Input Voltage 208V, 230V Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) Cord Length 6 feet (1.83 meters) Input voltage range for main operations 140 - 280V Other Input Voltages 220, 240 Transfer Time 2-4 ms

LINE #10 PART #: ____________________________________

APC Switched Rack PDU Part# AP8932

MFG: _______________________________________ The switched PDU shall have the following specifications:

Bid #RFB-IS-15201370

Page 4 of 6

(Rev. 03/08)

REQUIREMENTS

         

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

Nominal Output Voltage 100V, 120V Output Connections (24) NEMA 5-20R Overload Protection Nominal Input Voltage 100V, 120V Input Frequency 50/60 Hz Input Connections NEMA L5-30P Cord Length 10Ft Acceptable Input Voltage 100-120 VAC Maximum Input Current per phase 30A Load Capacity 2880 VA

LINE #11 PART #: ____________________________________

Cisco Power Module Part# PWR-C2-640WAC=

MFG: _______________________________________    

Power supply ( plug-in module ) AC 100-240 V 640 Watt FRU for Catalyst 3650

LINE #12 PART #: ____________________________________

FAN TRAY Part# FAN-T1= 

MFG: _______________________________________

Fan unit Cooling Module for Catalyst 3650

LINE #13 PART #: ____________________________________

APC SMX 120RMBP2U External Battery Pack Part# SMX120RMBP2U  

MFG: _______________________________________

120 V Capacity: 1200 Vah

LINE #14 APC Smart-UPS x 1500 VA Tower/Rack Part # SMX1500RM2UNC     

PART #: ____________________________________

Output Power Capacity: 1200 Watts / 1440VA Max Configurable Power: 1200 Watts / 1440VA Nominal Ouput Voltage: 120V Output Voltage Distortion: Less than 5% at full load Outpout Frequency (sync to mains): 50/60Hz +/3Hz (auto sensing)

Bid #RFB-IS-15201370

MFG: _______________________________________

Page 5 of 6

(Rev. 03/08)

REQUIREMENTS

              

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

Topology: Line interactive Waveform Type: Sine Wave Output Connections: (8) NEMA 5-15R Nominal Input Voltage: 120V Input Frequency: 50/60Hz +/- 3Hz (auto sensing) Input Connections: NEMA 5-15P Cord Length: 2.44 meters Input Voltage Range for Main Operations: 82 143V Input Voltage Adjustable Range for Mains Operation: 75 - 154V Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof Typical Recharge Time1 : 3 hour(s) RBC Quantity: 1 Control Panel: Multi-function LCD status and control console Audible Alarm: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm Emergency Power Off (EPO): Yes

Bid #RFB-IS-15201370

Page 6 of 6

(Rev. 03/08)