county of los angeles

---

COUNTY OF LOS ANGELES SPECIFICATIONS For DEPARTMENT OF PUBLIC HEALTH Date: June 15, 2015 Solicitation #: RFB-IS-15201746

Requisition #: DRQN-PH-15003546

For: CISCO 3650 SWITCHES & PROFESSIONAL SERVICES - (BRAND ONLY) BIDDER TO COMPLETE THE FOLLOWING INFORMATION

Company Name: Address: Contact Person: Tel. No.:

Fax No.:

E-mail address: Notice: Bidder shall state in the right hand column wherein your product offered differs, indicating performance, specific size, and/or make and model of all components when not exactly as specified. When bidder is bidding items exactly as described in the left hand column, please state “AS SPECIFIED” on the right hand column. Failure to return and fill in this form will be considered sufficient reason for rejection of your offer. Literature alone is not sufficient for consideration of your offer. All equipment must meet California and County of Los Angeles safety requirements. The equipment shall be the latest model and shall not have been used as a demonstrator. Bidders shall submit detailed literature on the unit they propose to furnish.

Bid #RFB-IS-15201746

Page 1 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #1 Cisco Network Device Mounting Bracket MFG: Cisco MFG Part#: AIR-AP-BRACKET-2= 



This bracket is versatile (works with electrical boxes, wall mounting, and adapts to ceiling installations) but leaves a larger gap between the ceiling and the AP than the low-profile bracket. It works in all environments. Dimensions: 7.5 x 5.5 x 1 inches ; 6.7 ounces

LINE #2 Cisco Mounting Clip for Wirless AP MFG: Cisco MFG Part#: AIR-AP-T-RAIL-F= 

If the ceiling tiles are flush with the ceiling grid, this clip provides a snug fit between the AP and the ceiling.

LINE #3 Cisco Aironet 3702i Wireless Access Point MFG: Cisco MFG Part#: AIR-CAP3702i-A-K9 

Integrated 802.11ac Wave 1 radio to support a 4x4 MIMO (multiple-input and multiple-output) with three spatial streams



Cisco CleanAir Technology with enhanced 80 MHz channel support Updated Cisco ClientLink 3.0 to boost performance for all clients, including 802.11ac

 

Dual Band 2.4/5 GHz integrated radios to address the growing needs of BYOD and bandwidth demands



Optimized AP Roaming ensures clients will associate with the best AP offering the best data rate available



Modular designed Access Point supports other modules such as Wireless, Security, Cisco 3G Small Cell or future technology such as 802.11ac Wave 2 Module



Includes 802.11 AP low Profile mounting bracket Part # AIR-AP-BRACKET-1



Includes Ceiling Grid clip for Aironet AP’s Part # AIR-AP-TRAIL-R

Bid #RFB-IS-15201746

Page 2 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #4 Cisco T-Rail Adapter for AP’s MFG: Cisco MFG Part#: AIR-CHNL-ADAPTER= 

T-Rail channel adapter for Cisco Aironet AP’s

LINE #5 Cisco Cisco ONE – 5500 WLAN Controller MFG: Cisco MFG Part#: C1-AIR-CT5508-K9 

Wireless: IEEE 802.11a, 802.11b, 802.11g, 802.11d, 







WMM/802.11e, 802.11h, 802.11k, 802.11n, 802.11r, 802.11u, 802.11w, 802.11ac. Wired/switching: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T. 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q Vtagging, and IEEE 802.1AX Link Aggregation. Encryption: WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys) AES: CBC, CCM, CCMP. DES: DES-CBC, 3DES. SSL and TLS: RC4 128-bit and RSA 1024- and 2048-bit. DTLS: ES-CBC. IPSec: DESCBC, 3DES, AES-CBC Interfaces and indicators: Uplink: 8 (5508) 1000BaseT, 1000Base-SX and 1000Base-LH transceiver slots. Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): GLC-T, GLC-SX-MM, GLC-LH-SM. LED indicators: link. Service Port: 10/100/1000 Mbps Ethernet (RJ45). Service Port: 10/100/1000 Mbps Ethernet (RJ45) For High Availability for future use. LED indicators: link. Utility Port: 10/100/1000 Mbps Ethernet (RJ45). LED indicators: link. Expansion Slots: 1 (5508). Console Port: RS232 (DB-9 male/RJ-45 connector included), mini-USB. Other Indicators: Sys, ACT, Power Supply 1, Power Supply 2 Physical and Environmental: Dimensions (WxDxH): 17.30 x 21.20 x 1.75 in. (440 x 539 x 44.5 mm). Weight: 20 lbs (9.1 kg) with 2 power supplies. Temperature: Operating temperature: 32 to 104°F (0 to 40°C); Storage temperature: -13 to 158°F (-25 to 70°C). Humidity: Operating humidity: 10 95%, noncondensing. Storage humidity: up to 95%. Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115W Maximum; 0.523 A at 220 VAC, 115W Maximum; Test Conditions: Redundant

Bid #RFB-IS-15201746

Page 3 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

Power Supplies, 40C, Full Traffic. Heat Dissipation: 392 Btu/hour at 110/220 VAC Maximum  Smartnet is Included: Part # CON-SNT-CT5508K9  Redundant power suppy included: Part # AIR-PWR5500-AC

LINE #6 Cisco ONE Wireless License Suite MFG: Cisco MFG Part#: C1-AIR-K9        

Cisco ONE Wireless Suite Bundle SWSS Upgrades to Cisco ONE Wireless Includes 400 Cisco ONE Foundation Perpetual Wirless License: Part # C1FPAIRK9 Includes 400 SWSS Updgrades C1 Foundation Perpetual Licenses Part #: CON-ECMU-C1FPAIR Includes 400 Cisco ONE ISE 25 endpoint Lic Part # C1-ISEBASE-AP Includes 400 Cisco ONE Wireless LAN Controller AP Part # C1-WLC-1 Includes 400 Cisco ONE PI Device Lic Part # C1-PI-LFASAP-K9 Includes 400 Cisco ONE Mobility Service Engine Part # C1-MSE-LS-1

LINE #7 Cisco MSE Virtual Appliance MFG: Cisco MFG Part#: L-MSE-7.0-K9



Cisco MSE Virtual appliance license

LINE #8 Cisco Catalyst 3650 Switch MFG: Cisco MFG Part#: WS-C3650-48PS-S 

Integrated wireless controller capability



Up to 40G of wireless capacity per switch



Support for up to 25 access points and 1000 wireless clients on each switching entity



24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports



Three fixed-uplink models with 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, or 4 x 10 Gigabit Ethernet ports

Bid #RFB-IS-15201746

Page 4 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW



Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput



Dual redundant, modular power supplies and three modular fans providing redundancy Full IEEE 802.3at (PoE+) with 30 W power on all ports in 1 rack unit (RU) form factor Software support for IPv4 and IPv6 routing, multicast routing, modular quality of service (QoS), Flexible NetFlow (FNF) Version 9, and enhanced security features

 



Includes Smartnet 8x5xnbd Cico Catalyst 3650 switch Part# CON-SNT-WSC36PSS



Includes the following numbers: 50 qty S3650UK9-36E IOS License, 50 qty PWR-C2-640WAC power supply, 50 qty CAB-TA-NA power cable 3560, 50 qty PWR-C2-BLANK balck power supply, 50 qty STACK-T2-BLANK stacking blank.

LINE #9 Cisco Mobility Express Bundle AP3700i and WLC2504 with 25 Lic MFG: Cisco MFG Part#: AIR-AP3702I-UX-WLC Cisco Mobility Suite that includes Wireless access points, wireless controller and AP Licesnses (25 Lic). Includes the following :  Qty 1 Smartnet Part # CON-SNT-AIRAP37U  Qty 1 AIR-AP3702I-UX-WLC Mobility Express Bundle AP3700i and WLC2504 with 25 lic  Qty 1 - CON-SNT-AIRAP37U SMARTNET 8X5XNBD Mobility Express bundle AP3700i and WLC2  Qty 1 - AIR-CT2504-25-K9Z 2504 Wireless Controller in a bundle with 25 AP licenses  Qty 1 - AIR-CT2504-CCBL 2504 Wireless Controller Console Cable  Qty 2 AIR-AP-T-RAIL-R Ceiling Grid Clip for Aironet APs – Recessed Mount (Default)  Qty 1 - CAB-AC2 AC Power cord North America  Qty 1 - LIC-CT2504-BASE Base Software License  Qty 2 - AIR-AP3702I-UXZBLK BOM Level AP3700i Bulk PID for Universal domain  Qty 1 - AIR-CT2504-SW-8.0 Cisco 2504 Wireless Controller SW Rel. 8.0  Qty 1 - LIC-CT2504-25 25 AP License for 2504 WLAN Controller  Qty 2 AIR-AP-BRACKET-1 802.11n AP Low Profile Mounting Bracket (Default)  Qty 2 - S3G3K9W7-15303JA Cisco 3700 Series IOS WIRELESS LAN  Qty 2 - SWAP3700-RCOVRY-K9 Cisco 3700 Series IOS WIRELESS

Bid #RFB-IS-15201746

Page 5 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #10 Cisco VMWare SW+ Licesne for ACS 5.6 MFG: Cisco MFG Part#: R-CSACS-56VM-K9=  

Cisco ACS VMWare Software License Qty 2 Cisco Sucure ACS 5 base licenses Part # L-CSACS-5BASE-LIC

LINE #11 Cisco SW Support ACS 5.6 VMWare Software MFG: Cisco MFG Part#: CON-SAS-CSACS56M 

Smartnet for Cisco VMware ACS License.

LINE #12 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH1YLY  

Ethernet Cat 5e Patch Cable 1 foot Yellow

LINE #13 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH3YLY  

Ethernet Cat 5e Patch Cable 3 foot Yellow

LINE #14 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH5YLY  

Ethernet Cat 5e Patch Cable 5 foot Yellow

Bid #RFB-IS-15201746

Page 6 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #15 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH7YLY  

Ethernet Cat 5e Patch Cable 7 foot Yellow

LINE #16 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH10YLY  

Ethernet Cat 5e Patch Cable 10 foot Yellow

LINE #17 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH14YLY  

Ethernet Cat 5e Patch Cable 14 foot Yellow

LINE #18 Panduit TX5e Patch Cable Yellow MFG: Panduit MFG Part#: UTPCH20YLY  

Ethernet Cat 5e Patch Cable 20 foot Yellow

LINE #19 Panduit Patchlink Horizontal Cable Mgr MFG: Panduit MFG Part#: WMPH2EY 

Panduit Horizontal Rack Cable Manager

LINE #20 Panduit Mini Com Metal Shielded Patch Panel MFG: Panduit MFG Part#: CP48BLY 

Panduit Mini-Com All Metal shielded Modular Patch Panel.

Bid #RFB-IS-15201746

Page 7 of 8

(Rev. 03/08)

REQUIREMENTS

INDICATE EXCEPTION OR STATE “AS SPECIFIED” BELOW

LINE #21 Panduit Mini Com TX5e Modular Insert MFG: Panduit MFG Part#: CJ5E88TGBU 

Panduit Modular Insert Ethernet Cat 5E

LINE #22 Panduit Mini-Com TX-5e Modular insert MFG: Panduit MFG Part#: CJ5E88TGOR 

Panduit Modular Insert Ethernet Cat 5E

LINE #23 Panduit Mini-Com suface mount box MFG: Panduit MFG Part#: CBX1WH-A 

Panduit Mini Com surface mount box

LINE #24 Panduit Mini-Com suface mount box MFG: Panduit MFG Part#: HLTP2I-X0 

Panduit Cable Ties – hook and loop HLTP.

Bid #RFB-IS-15201746

Page 8 of 8

(Rev. 03/08)