CT-0155TBR-L25P F_VB

---

155 Mb/s ATM – Single Mode Transceiver 1×9 Bi-Di, Single SC/UPC Pigtail, 1550 nm FP LD for Single Mode Fiber, RoHS Compliant Features

Applications • • • • •

Fast Ethernet FDDI ATM/SONET OC-3/SDH STM-1 Single mode fiber links Optical-Electrical Interface Conversion

RoHS Pb

•

1550 nm FP LD

•

Data Rate: 155 Mb/s, NRZ

•

Single +3.3 V Power Supply

•

RoHS Compliant and Lead-free

•

PECL Differential Electrical Interface

•

Industry Standard 1×9 Output Footprint

•

Single SC/UPC Connectorised Pigtail

•

Compliance with 100Base-FX of IEEE802.3u Standard

•

Compliance with FDDI PMD Standard

•

Compliance with ATM Standard

•

Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

Description The CT-0155TBR-L25P F from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 155 Mb/s. It operates with +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with the industry standard 1x9 footprint. Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component. The module is a single fiber connector transceiver designed to use in fast Ethernet applications and provide an ATM/SONET OC-3/SDH STM-1 compliant link for 155 Mb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

EMC Most equipment utilizing high-speed transceivers will be required to meet the following requirements: 1) FCC in the United States 2) CENELEC EN55022 (CISPR 22) in Europe To assist the customer in managing the overall equipment EMC performance, the transceivers have been designed to satisfy FCC class B limits and provide good immunity to radio-frequency electromagnetic fields.

Eye Safety The transceivers have been designed to meet Class 1 eye safety and comply with EN 60825-1.

Coretek Opto Corp.

1F, 1 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.

http://www.coretek.com.tw

Tel:886-3-5787871

Fax:886-3-5645105

Page 1 of 4 04/07/2017 Version：B

155 Mb/s ATM – Single Mode Transceiver Product Information Model Number

Operating Voltage & SD Output

Distance

Wavelength

Output Power

Sensitivity

CT-0155TBR-L25C F

3.3 V PECL DC/DC

20 km

1550 nm FP / 1310 nm

-10 ~ -3 dBm

≦-28 dBm

ABSOLUTE MAX RATINGS PARAMETER Storage Temperature Supply Voltage Lead Soldering Temperature/Time Data Input Voltage

SYMBOL TS VCC TSOLD ---

MIN -40 0

SYMBOL TA VCC

MIN. 0 3.10

0

MAX 85 6 260 Vcc

UNIT °C V °C V

NOTE

10 sec on lead

OPERATING CONDITIONS PARAMETER Ambient Operating Temperature Supply Voltage

TYP.

MAX. 70 3.50

UNIT °C V

NOTE

ELECTRICAL CHARACTERISTICS PARAMETER Transmitter Transmitter Supply Current Transmitter Data Input Current – Low Transmitter Data Input Current – High Transmitter Data Input Voltage – Low Transmitter Data Input Voltage – High Receiver Receiver Supply Current Receiver Data Output Voltage – Low Receiver Data Output Voltage – High Signal Detect Output Voltage – Low Signal Detect Output Voltage – High

SYMBOL

MIN

MAX

UNIT

NOTE

200

1 1

2 2 2 2

ICCT IIL IIH VIL-VCC VIH-VCC

-1.810 -1.025

350 -1.620 -0.880

mA µA µA V V

ICCR VOL-VCC VOH-VCC VOL-VCC VOH-VCC

-1.810 -1.025 -1.810 -1.025

100 -1.620 -0.880 -1.620 -0.880

mA V V V V

-350

TRANSMITTER ELECTRO-OPTICAL CHARACTERISTICS PARAMETER Optical Output Power Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise time (10%-90% ) Optical Fall time (10%-90% ) Output Eye

SYMBOL Po ER λc Δλ tr tf

MIN -10 8.2 1510

TYP.

1550

MAX -3 1576

UNIT dBm dB nm

4 nm 2.0 ns p-p 2.0 ns p-p Compliant with ITU recommendation G.957

Coretek Opto Corp.

1F, 1 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.

http://www.coretek.com.tw

Tel:886-3-5787871

Fax:886-3-5645105

NOTE 3

4 4

Page 2 of 4 04/07/2017 Version：B

155 Mb/s ATM – Single Mode Transceiver RECEIVER ELECTRO-OPTICAL CHARACTERISTICS PARAMETER Maximum Input Optical Power Receiver Sensitivity Operating Wavelength Signal Detect - Asserted Signal Detect - Deasserted Signal Detect - Hysteresis

SYMBOL Pmax Pmin

MIN -3

λ PA PD PA - PD

1270

TYP.

1310

MAX -28

UNIT dBm dBm

1350

nm

-28

dBm dBm dB

-45 0.5

4

NOTE 5 5 6 7

Notes: 1. Compatible with 10K, 10KH, 100K ECL and PECL output signals. 2. These outputs are compatible with 10K, 10KH, 100K ECL and PECL inputs. 3. Measured average power coupled into 9/125 µm single mode fiber. 4. The input data pattern is a 12.5MHz square wave pattern. 5. Measured with 223-1 PRBS at BER<10-10 6. Measured on transition – low to high 7. Measured on transition – high to low

BLOCK DIAGRAM OF TRANSCEIVER

PIN OUT DIAGRAM OF TRANSCEIVER

ELEC TR IC A L SU B A SSEM B LY D A TA IN D IFFER EN TIA L

W D M O PTIC A L SU B A SSEM B LY

N/C LD

PIN PH O TO D IO D E

D R IV ER IC

Q U A N TIZER IC

SIG N A L D ETEC T O U T SIN G LE-EN D EN

N/C

PR EA M P IC

D A TA O U T D IFFER EV TIA L

Single Pigtail Fiber Connector

9=VEET 8=TD+ 7=TD6=VCCT 5=VCCR 4=SD 3=RD2=RD+ 1=VEER

PIN OUT TABLE Pin

Symbol

Mounting Posts 1 2 3 4 5 6 7 8 9

VEER RD+ RDSD VCCR VCCT TDTD+ VEET

Functional Description The mounting posts are provided for transceiver mechanical attachment to the circuit board. They should not be connected to the circuit ground but can be connected to the chassis ground. Receiver Signal Ground Receiver Data Non-inverted Differential Output Receiver Data Inverted Differential Output Signal Detect is a PECL output. A high level indicates a received optical signal Receiver Power Supply Transmitter Power Supply Transmitter Data Inverted Differential Input Transmitter Data Non-inverted Differential Input Transmitter Signal Ground

Coretek Opto Corp.

1F, 1 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.

http://www.coretek.com.tw

Tel:886-3-5787871

Fax:886-3-5645105

Page 3 of 4 04/07/2017 Version：B

155 Mb/s ATM – Single Mode Transceiver RECOMMENDED CIRCUIT SCHEMATIC Vcc TX_GND

9 R1

R3

C4

8 TX+

LD Driver

TX+

7 TX-

TXR2

Vcc_TX

L1

6

R4

Vcc

C1 = 4.7μ F L1/L2 = 1μ H C2/C3/C4/C5 =0.1μ F R1/R3/R5/R7/R9 = 130Ω R2/R4/R6/R8/R10 = 82Ω

C2

Vcc_RX

Vcc

L2

5 C3

C1 C5

4 Pre Amp

Post Amp RX_GND

R5

SD

R7

R9

3 RX-

RX-

2 RX+

RX+ R6

1

Transceiver

R8

R10

SerDes

MECHANICAL DIMENSIONS Units in mm

All dimensions are ±0.2mm unless otherwise specified.

Claim: CORETEK Opto Corp. reserves the right to make changes in the specification described hereinafter without prior notice.

Coretek Opto Corp.

1F, 1 Industry E. Rd. IV., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.

http://www.coretek.com.tw

Tel:886-3-5787871

Fax:886-3-5645105

Page 4 of 4 04/07/2017 Version：B