50
100
460
Series
Side View
480
Wall Hung
300
490
55
55 60
600 460
50 25
50
Inspire Series 50
100
180
55
Slick 750
50 25
100
50
Slick 900
750 Side View
A highly versatile wall hung vanity available in four sizes, Slick is a great choice if 60 consistency throughout the home’s bathrooms is sought. Finger-pull handles keep 600 the look clean and uncluttered, as does the white top in600 easy-care polymarble with integrated basin. Cabinet doors open to reveal extensive storage with additional 50 50 100 space provided in two100large drawers (excluding 600mm).
900
375
490
130
55
750 530
900MM 50
600
750
460
Door 300
1200MM
50
100
600750 SLICK SLICK
130 Drawer50 300 25 60
205
750 750
530
Door 300 490
Drawer 300
530 530
50
Door 450
Side View
Drawer 300
375 490
490
55
215
60
530
SLICVAN9
I/N 0116719
I/N 0116720
Door 300 Drawer SLICVAN12 300
I/N 0116721 750
50
900
60
Drawer 300
Drawer 300
50 25
325
460
460
530 Door Door 450 300
50 25
450
300
25 205 Drawer 400
490 50 180
1200
25
100
180
375 130
205 100
60
900 300 490
215
1200 SLICK
Drawer 1200 300
Drawer SLICVAN7 300
750
550
215
I/N 0116717
325
300 Door 400
455
SLICVAN6
600 Door 400
Drawer 300 455
900 900
Door 450
25 205 Drawer50 300 25
Drawer 400
50
215
490
100
180
750900 SLICK SLICK
215
205
300
530 530
460 530 460
Door 300
Drawer 300
490
600
50 25 215
450
100
1200
50
300
300
60
490
130
55 60
750
CIBO DESIGN – WHO ARE WE?
1200MM*
325 50 25
60
100
60
460
750460
460
550 50 180
130
50 100
900
60
1200 SLICK
215
215 25
600
300
325 900MM*
750 SLICK Door 300
55
55
205
490
180 375
600
600
50 25
180
750
180
600
900 SLICK
50
300
300
205
100 60
Drawer 300
100
450
130
50
100
180 300
130
180
900
50
180 * Drawers RHS only
25
455
Door 300
Door Side 300 View
Door 300 205 50 25
50 25 60
900 Door 300
300
455
Door 300
450
750MM*
Drawer 300
60
600
W 600 / 750 / 900 / 1200 50 100 x D 460 x H 530mm
50 25
215
490
1200
180
Drawer 300 300
600MM*
100
55
130
DIMENSIONS:
325 60
50
455
530 460
100
455
530
50 25
60
460
300 550
325
215
180 375 Door 450
130
100
600
900 SLICK
50
900
600
205
460
50
600 SLICK
460
300 490
205
215
Drawer 400
450
750 SLICK
Finger-pull handles on doors/drawers Soft-close doors Standard drawer runners
Side View
180
480
215
460
180
25
MECHANISMS:
60
130 60
750
Established in 1994 on Sydney’s northern beaches, CIBO Design has built a solid reputation180 for its 600 collection of high quality Australian325 550 designed bathroomware. 50 50 100 100 Specialising in producing innovative 180 180 1200 bathroom storage solutions, CIBO’s 375 450 300 300 products combine contemporary 490 130 205 205 490 design and quality craftsmanship 60 60 with practicality. 750 900 460
50 25
Drawer 300
455
Door 300
55
130 50 25
60
60
600 600
Drawer 300
Door 300 450
Side View
Must be installed by a Licensed Plumber 120mm allowance behind drawer for hot/cold pipework 50 Screw fix though the rear of 100 180 the cabinet, washers must be 375 300 used to avoid the screw pulling 130 490 through the carcass 50 100 60 Ensure top and sides of unit are 180 750 silicon sealed 300 Detailed installation instructions 490 55 over page
460
480
460
530 460
490
600 SLICK
50 25
60
100
455
455
Door 300 300
55
50 180
180 Door 300
205
490
INSTALLATION TIPS:
460
100
750
300
205
750MM
50 25
60 50
450
750 SLICK
Three (3) years (see warranty 600 information over page)
50mm high, 460mm deep polymarble top with integrated centred basin 50 100 1 only Tap hole options: 180 Includes 40mm plug and waste 300 without overflow 490 55 Tapware sold separately
460
215
600MM
130
460
490
55 60
Exterior: white gloss Interior: white moisture resistant melamine
460
130
480
600 SLICK
WARRANTY:
TOP/BASIN:
50
460
SET-OUT FOR375LICENSED PLUMBER: 300
50
25
460
300 490
55
CABINET FINISH:
180
530
215
460
180
50
50 25
480
460
460
Door 300 55
460
530
Door 300 300
490
100
180
455
460
180
55
Drawer 400
130 60
50
460 460
600
490
460 460
50
60
480
300
130
480
490
375 600 SLICK
50
460
460
300 55
Side View
100
180
455
rawer 300
r
Inspire Series
50
Slick Vanity 600 / 750 / 900 / 1200 Inspire 180
rawer 300
r
Inspire Series
Inspire Series
130
50
100
300
60
Installation Instructions for Licensed installer (plumber/builder)
Slick Delivery/Pick-up & Installation If an item is damaged or imperfect when opened, do not proceed with installation. If a defective item is installed, CIBO is not liable for removal of the item, nor will CIBO accept responsibility to repair or replace the product. CIBO bathroomware should only be installed by a licensed plumber.
Returns & Exchanges Please retain your receipt and contact the ‘Returns and Exchanges’ Desk at the Bunnings store where you purchased the item.
1. Kick should fit snugly with the floor and may require trimming with an electric planer if floor is not entirely level. Packers may also be required to ensure cabinet is level from left to right as well as front to back. Seal around kick with bathroom quality silicone to avoid water gaining access from floor and/or walls. IT IS THE RESPONSIBILITY OF THE INSTALLER TO ADJUST THE DOOR(S) AFTER INSTALLATION.
2. Under no circumstances should vanities and/or tops be tiled into the wall. CIBO vanities and basin/tops must be fitted to finished/completed wall coverings e.g., tile, masonry or other cladding method deemed acceptable, as per the building code (of Australia) 2013. The CIBO Warranty does not cover any vanity and/or top and/or basin that has been tiled ‘into’ a wall i.e., fitting or fixing a vanity to a wall and tiling around it, and/or tiling down and/or around the vanity and top/basin.
Warranty This product is covered by a three (3) year replacement product warranty. Products which are within 3 years from the date of purchase, found upon inspection by an authorised representative to be defective will be repaired or exchanged with an equivalent product free of charge. Replaced items become CIBO Design’s property. All replacement products will be available for collection without charge to the customer at the nearest Bunnings store to the customer’s location, or elsewhere as agreed with the customer. Warranty for Labour and Spare Parts – One (1) Year The labour for the replacement of products and spare parts to which this warranty applies will be supplied by CIBO Design if the warranty claim is made within one (1) year from the date of purchase.
Drawer Removal
Product Care & Maintenance
1. Carefully remove drawer(s) and door(s) (see Drawer & Door Removal instructions) and cover runners before installation, to avoid damage. If top has not been fixed to vanity, remove it from vanity. 2. Using a hole saw, drill holes for water supply pipes, wastes etc. 3. Carefully move cabinet into place. Pack vanity to required height ensuring vanity top is level from side to side and front to back. Packers may be required behind the unit to ensure top is level and to prevent unit from twisting. 4. Once vanity is level, fasten it to the wall using washers around the appropriate fixings ie. screws, bolts (not supplied). It is the installers responsibility to determine what fixing materials are needed. Fixings should be made as high as possible on unit.
(before vanity installation)
We advise that it is the responsibility of the purchaser to ensure the product is installed and maintained appropriately. All materials used are of high quality and care must be taken when cleaning.
Top Washer
Non-soft closing drawers can be simply removed by pulling out fully and lifting.
Door Removal/Replacement (responsibility of the installer) During installation, it is advisable to remove door(s) from cabinet. To do this, unclip all hinges on each door.
Polymarble Best practice is to clean polymarble with a small amount of warm water and a ‘Micro’ cloth. When finished, wipe dry with ‘Micro’ cloth. Never use caustic chemicals, razor blades, putty knives or abrasive pads as they may damage the surface. Cabinets The most effective cleaning method is to use a damp cotton cloth and a mild detergent. Never use an ammonia-based product or any kind of abrasive cleaning product.
Wall Back
IMPORTANT NOTES: Vanities with Kicks
Vanity Unit Installation
Timber Studs
5. Sweep debris from interior of unit. 6. Now replace top ensuring front and
To Remove Doors Locate button at back of top hinge and press. Hold base of door and pull forward to disengage top hinge. Repeat with bottom hinge. 1
ends of top line up with front and ends of unit. This may leave gaps between top and wall. Fix top to vanity with silicone.
7. The unit must be sealed (along the back edge of top and down the sides) against the wall with bathroom quality silicone. The best method of applying silicone is to cut the appropriate sized tip at a 65° angle and to evenly run a bead around the unit ensuring all gaps are filled. Seal around the cabinet with silicone.
Door Hinge Adjustment1 (responsibility of the installer) A
To Replace Doors Line up hinges with corresponding hinge plates. At base of hinge is a small metal rod that must be lined up with cradle arms of hinge-plate.
8. Spray soapy water on the silicone
A
B
A. This screw moves the hinge left or right. B Clockwise direction = moves the hinge left Anticlockwise direction = moves the hinge right. (The opposite occurs when the hinge is fitted the other way around)
A
9. Pipes can now be connected.
Spare parts which are within one (1) year from the date of purchase and found upon inspection by an authorised a CIBO Design representative to be defective in construction, material or assembly, will be replaced free of charge. Products found to be faulty more than one (1) year from the date of purchase will be replaced free of charge by CIBO Design. After one (1) year from date of purchase, labour and spare parts costs are the responsibility of the customer. Warranty Conditions This warranty will apply only under all of the following conditions: • The item has been installed by a licensed plumber; • This item has been installed for and subjected to domestic residential use only; • Failure is due to the manufacture of the product; • Proof of purchase (including date
1
1. There are two primary screws that can be adjusted to align the door.
joint (between the wall and top) to stop silicone sticking to wall, then wipe off excess silicone and soapy water.
DAMAGE MAY OCCUR IF THE PRODUCTS ARE CONSTANTLY EXPOSED TO WATER. SILICONE MUST BE USED TO SEAL ALL JOINS – TOPS, CABINET SIDES AND KICKBOARDS MUST BE SEALED TO PREVENT WATER PENETRATION.
Locate the hinges of the door to be adjusted. It may be necessary to adjust all hinges in order to achieve correct alignment.
Once hinge is in place, push back of hinge down towards the hinge-plate. Hinge will snap down and engage.
of purchase) is provided; • The installation of the product is in accordance with the instructions provided This warranty does not include faults caused by: • Unsuitable or improper use; • Incorrect installation or installation not in accordance with the instructions provided; • Installation or part installation by the purchaser or any person other than a Licensed Plumber; • Normal wear and tear including water* and natural causes such as sunlight, humidity and other environmental conditions or factors; • Inadequate or complete lack of maintenance; • Chemical, electrochemical or electrical influences; • Harsh detergents or abrasive cleaners used on product finishes *Important note: CIBO Design vanity cabinets are manufactured from Moisture Resistant (MR) materials but are not waterproof. Care must be
B. This screw moves the hinge in or out. Clockwise direction = moves the hinge towards the vanity Anticlockwise direction = moves the hinge away from the vanity
B
taken to dry spillages or leakage of water that may gain access to cabinetry. Accurate sealing of the vanity cabinet and kickboard (where applicable) is vital for proper maintenance of the product and ensuring longevity. Exclusions - To the fullest extent permitted by law, CIBO Design excludes all liability for damage or injury to any person, damage to any property, and any indirect consequential or other loss or damage. Warranty Claim Procedure - Please retain your receipt and contact the ‘Returns and Exchanges’ Desk at the Bunnings store where you purchased the product. Warranty claims can also be sent to: CIBO Design, After Sales Service PO Box 7461, Warringah Mall, Brookvale NSW 2100 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the customer given by this CIBO Design warranty are in addition to any other rights and remedies available to the customer as a consumer under any laws that relate to the goods covered by this CIBO Design warranty. CIBO Design Pty Ltd 1/130 Old Pittwater Road Brookvale NSW Australia Postal: PO Box 7461, Warringah Mall, Brookvale NSW 2100 Tel: (02) 9939 4434 Email:
[email protected]