[PDF]foldable recipe holder - Rackcdn.comhttps://cc831cbd7a5a3a616f82-5093119187eb17284bcf20613cda98f7.ssl.cf1.rackcd...
1 downloads
189 Views
1MB Size
PLANS BY CHERISHED BLISS
FOLDABLE RECIPE HOLDER
D I F F I C U LT Y L E V E L : E A S Y
TOOLS REQUIRED
18V ONE+™ AIRSTRIKE™ 18GA BRAD NAILER 10 IN. PORTABLE TABLE SAW WITH QUICKSTAND VARIABLE SPEED DRILL 2 PEAK HP PLUNGE ROUTER
ADDITIONAL REQUIRED ITEMS TAPE MEASURE PENCIL SAFETY GLASSES HEARING PROTECTION
PURCHASE LIST: 1/2" HINGES BRAID NAILS WOOD GLUE 1/2" MDF BOARD 1/4" MDF BOARD
PLANS BY CHERISHED BLISS
PAG E : 2
ASSEMBLY:
1
2
Cut pieces according to sizes on picture.
Using a router, cut dados in the board according to the measurements.
PLANS BY CHERISHED BLISS
PAG E : 3
3
Cut a 45 degree angle on (1) of the 6" boards. Making sure the longest side measures 6".
4
Lay the 3 pieces end to end. The right 6" piece should have the longest side facing up, the same as the dados. (as pictured)
PLANS BY CHERISHED BLISS
PAG E : 4
4
Lay the 3 pieces end to end. The right 6" piece should have the longest side facing up, the same as the dados. (as pictured)
5
Attach the boards using the hinges, making sure to center the hinge on the seams.
PLANS BY CHERISHED BLISS
PAG E : 5
6
Build the part that will hold the recipe book/tablet. This should be 9” wide.
7
Attach to the recipe stand with wood glue and brad nails from the back of the 12” board.
PLANS BY CHERISHED BLISS
PAG E : 6