Hydraulic Hose Technical Bulletin No. 24Page 1 of 1


[PDF]Hydraulic Hose Technical Bulletin No. 24Page 1 of 1 - Rackcdn.comc3366550.r50.cf0.rackcdn.com/pdfs/techbul24.pdfCached(2) lengths of hose (length...

1 downloads 131 Views 23KB Size

Hydraulic Hose

Technical Bulletin No.

24

Page 1 of 1

24.1 Parts List a. Hydraulic Hose Kit (2) lengths of hose (length specified by customer) (1) length pneumatic tubing w/ connectors (4) red protective plugs (1) small piece of pipe foam insulation

b. Additional Materials (supplied by others when necessary) Pipe foam insulation as needed Pipe clamps Wire ties 24.2 Description The hydraulic hoses used on the Endless Pool are high pressure, durable hoses designed to withstand up to 2000 psi. They are fitted with JIC bevel fittings that connect to the valve assembly at the poolside and the 5HP power unit located remotely. These hoses are manufactured in increments of five feet. Because of this, be sure to order the hoses by rounding up the measurement between the valve assembly and the power unit to the nearest multiple of five. Additionally, be sure to allow for running along or around walls. The length of these hoses should not exceed 75'. If you wish to exceed this limit, please contact our Customer Service Department at (800) 910-2714. The pneumatic tubing provided should connect the AS5-TD controller with the air button poolside. Be sure to include this when running hydraulic hose through conduit. Also be sure that nothing rests on top of this tube, as it may obstruct the air pulse that activates the controller.

24.3 Additional Considerations To ensure that the hoses are as quiet as possible, be sure to insulate them from any surface against which they may vibrate, e.g. walls, other equipment, etc. Please allow at least a week of lead time when ordering any backordered hydraulic hoses from Endless Pools. If you live in a remote location, you may need to allow additional time for shipment. The Customer Service Department can expedite shipping of the hoses if necessary, but there will be an upcharge to your account for the difference between the shipping selected and the UPS Ground rate that Endless Pools will pay regarding backordered item shipments. The hydraulic hoses provided with the Endless Pool have a standard length of up to 25 feet. Please try and calculate your hose length as accurately as possible as excess hose will result in additional noise in the installation as well as unnecessary clutter in your equipment room. If additional hoses are required, they can be purchased from Endless Pools at $5 per foot for a pair of hose lengths. Example: Two forty foot hoses cost: 40ft.- 25ft.= 15ft. x $5= $75. If the length of hose that you ordered was insufficient for your installation, it is possible to splice an additional length onto the existing hose.

Hydraulic Hose Insulation Cut the 3’ length of pipe insulation into appropriate length pieces and place around the hydraulic hoses in areas where it is up against the steel pool wall panels or against the framing members of the pool surround. This will minimize noise due to the vibration of these hoses during use of the pool. Endless Pools Inc.

5/3/04