[PDF]PLT 50109 Retrofit Kit Installation Instructions - Rackcdn.comhttps://a89b8e4143ca50438f09-7c1706ba3fabeeda794725d88e4f5e57.ssl.cf2.rackcd...
1 downloads
236 Views
428KB Size
INSTALLATION INSTRUCTIONS FOR THE 4RB, 8RB - SERIES RETROFIT KIT APPLICATION: General/Perimeter Lighting
Strip fixture with T8 bulbs and ballast
1‐ Turn off power 2‐ Remove ballast/wireway cover from existing strip fixture
3‐ Remove lampholders and socket bars from existing strip housing 4‐ Remove ballast
LED-4RB,8RB - X1 RETRO-BWE Rev.0
Page 1
4RB – 4ft - X1 LED retrofit kit
5‐ Install red sockets to one end of the fixture.
6‐ Install green sockets to the opposite end of the fixture.
7‐ Remove the knock-out in desired location. Bring the quick disconnect thru.
8‐ Re-Install the cover to the pan.
9‐ With the power still disconnected, install the LED lamps to the fixture. Then test the fixture. NOTE: 8RB IS MADE FROM (2) 4RB KITS COMBINED LED-4RB,8RB - X1 RETRO-BWE Rev.0
Page 2