TIS 1040 Lamp Tester

---

TIS 1040 Lamp Tester

The TIS 1040 ignites all gas filled lamps including low / high pressure vapour lamps, fluorescent, low/high pressure sodium, neon, mercury and metal halide. Other tests carried out include voltage and a unique continuity test using single pole technology. The TIS 1040 also tests ballasts, capacitors, starters, resistors, diodes and photo-cells. A very handy unit for testing new lamps to ensure they are ok before climbing ladders, scaffolding, platforms or cherry pickers! Specification

Basic Functions LAMP TEST Voltage with New Battery approx. 3kV/160kHz Field Strength 150-170kHz approx. 100μv/m VOLTAGE TEST Test Range 60-250V CA Frequency 40-60Hz Test Current <200mA CONTINUITY TEST Dielectric Strength 250V CA/CC Test Range approx. 0-5MΩTest Current <7μA

Special Functions

Test Gas Filled Lamps, including: Fluorescent Low/High Pressure Sodium Neon Tubes Mercury Lamps Metal Halide Metal Halogen Tests photo-Cells, Ballasts & Starters Voltage Tester Single Pole Single Pole Continuity Test Audible / Visual LEDs Torch Light.

General Characteristics

Power 9v MN1604 Alkaline Only Weight 170g Size 255mm x 60mm x 40mm

Standard Accessories

Carrying Case Battery Instruction Manual