installation kit

---

Accessories 10 2

Water flow

INSTALLATION KIT LOW CONSUMPTION DOMESTIC HOT WATER WATER HEATER

1

3

CW

to tap 5

9

4

Hot water outlet

Cold water inlet 8

1 - Mains cold water supply

11

2 - Stop cock (not supplied) 3 - Pressure reducing valve (included)

7

6

100 mm MAX

4-5 - Check valve - Expansion relief valve (included)

300 mm MIN

DETAILS OF THE INSTALLATION

6 - Discharge pipe 22 mm 7 - Drain cock (not supplied) 8 - Tundish (included) 9 - Expansion vessel (included) 10 - T/P relief valve (included) 11 - Electrolytic fittings (included)

In the United Kingdom it is mandatory for all models of unvented domestic hot water heaters to be installed with an installation kit (included). This kit is composed of:

Pressure reducing & relief valves

* This image is only for reference. Check the instruction manual or the Building Regulations (PART G) for specific details and accessories required to perform a proper installation. The Rointe water heaters must be installed by an installer with a valid Unvented Water Heaters Installer certification.

The installation kit is included in all the D Series and KYROS water heaters but can also be purchased separately.

MODELS

KITKW01

KITKW02

KITKW03

Compatible with

50 / 100 L

100 / 150 L

200 L

8 litres (0.1 Mpa)

12 litres (0.1 Mpa)

18 litres (0.1 Mpa)

15 - 25 mm

15 - 25 mm

15 - 25 mm 0.35 Mpa

CHARACTERISTICS Expansion vessel

Tundish

Mandatory requirement

Tundish

Unvented water heaters installation in the United Kingdom

Pressure reducing valve

0.35 Mpa

0.35 Mpa

Relief valve

0.60 Mpa

0.60 Mpa

0.60 Mpa

EAN CODE

8436045914330

8436045914347

8436045914354

£ 218

£ 219

£ 227

Expansion vessel

T.P. 56 | BROCHURE FOR PROFESSIONALS · 2017