[PDF]installation kit - Rackcdn.comhttps://04646a9cf351cc0d3888-b8b406d15fe93f790abb5bf0e9ab7ab3.ssl.cf3.rackcd...
0 downloads
228 Views
111KB Size
Accessories 10 2
Water flow
INSTALLATION KIT LOW CONSUMPTION DOMESTIC HOT WATER WATER HEATER
1
3
CW
to tap 5
9
4
Hot water outlet
Cold water inlet 8
1 - Mains cold water supply
11
2 - Stop cock (not supplied) 3 - Pressure reducing valve (included)
7
6
100 mm MAX
4-5 - Check valve - Expansion relief valve (included)
300 mm MIN
DETAILS OF THE INSTALLATION
6 - Discharge pipe 22 mm 7 - Drain cock (not supplied) 8 - Tundish (included) 9 - Expansion vessel (included) 10 - T/P relief valve (included) 11 - Electrolytic fittings (included)
In the United Kingdom it is mandatory for all models of unvented domestic hot water heaters to be installed with an installation kit (included). This kit is composed of:
Pressure reducing & relief valves
* This image is only for reference. Check the instruction manual or the Building Regulations (PART G) for specific details and accessories required to perform a proper installation. The Rointe water heaters must be installed by an installer with a valid Unvented Water Heaters Installer certification.
The installation kit is included in all the D Series and KYROS water heaters but can also be purchased separately.
MODELS
KITKW01
KITKW02
KITKW03
Compatible with
50 / 100 L
100 / 150 L
200 L
8 litres (0.1 Mpa)
12 litres (0.1 Mpa)
18 litres (0.1 Mpa)
15 - 25 mm
15 - 25 mm
15 - 25 mm 0.35 Mpa
CHARACTERISTICS Expansion vessel
Tundish
Mandatory requirement
Tundish
Unvented water heaters installation in the United Kingdom
Pressure reducing valve
0.35 Mpa
0.35 Mpa
Relief valve
0.60 Mpa
0.60 Mpa
0.60 Mpa
EAN CODE
8436045914330
8436045914347
8436045914354
£ 218
£ 219
£ 227
Expansion vessel
T.P. 56 | BROCHURE FOR PROFESSIONALS · 2017